How to Clean Powder-Coated Steel Frames
Using a soft, damp rag with soap and water will clean up to 99% of grime on powder-coated steel. Care should be taken to not soak the frame or squeeze water into the openings in the frame around the seat, frame link rivets, the backrest, etc.
How to Clean FlexOne Composite Seat & Back
Mix water with a mild household detergent, such as Simple Green, and wipe down the seat and backrest with a rag
How to Clean FlexOne LX & FX Vinyl Upholstery
Use a solution of 10% bleach mixed with 90% clean water. Always, pre-test any cleaning method or agent in a small, hidden, inconspicuous area to ensure it won’t damage the fabric.
Make sure to wipe off all bleach with clean water and then dry the vinyl with a clean towel to remove any chemical resident that could discolor or degrade the material surface.
How to Clean FlexOne LX and FX Polyurethane Upholstery
Remove stains by using a soft brush or sponge and then apply warm, soapy water to the stain. Do not over wet as this may leave a ring and soak up any remaining cleaning solution. Use light, quick strokes, and start from the outside of the stain and work towards the center. Avoid rubbing or scrubbing the area as this may damage the fabric. Use a clean cloth and cool water to remove any residue.
Allow fabric to dry thoroughly and do not use heat as that will set the stain into the fabric. To disinfect, first confirm that it is safe to use bleach on your product by testing a small, inconspicuous area. Protect and cover the furniture framework along with surrounding areas, and work in a well-ventilated area with gloves and eye protection.
After disinfecting the upholstery, rinse it well multiple times. Any bleach left on the fabric will assist in early degradation (shortening the lifespan) of the fabric.
